Skip to content

Drip, sprinkler and irrigation automation · Chennai & Bengaluru

Drip automation

Diaphragm solenoid valves and butterfly valves for irrigation

Valves open and close each irrigation zone. Greenly supplies diaphragm-type solenoid valves from 1" to 4" that can be operated from a mobile phone or manually, and butterfly valves for larger mains.

Diaphragm solenoid valves and butterfly valves for irrigation
Solenoid
1", 1.5", 2", 3", 4"
Operation
Mobile, auto or manual
Butterfly
Retainer-less, two seats
Use
Zone and mainline control

Range

Models (2)

Compare features and ratings, then ask for the price and datasheet of the model that fits.

Diaphragm Type Solenoid Valve

Greenly · Valves

Diaphragm Type Solenoid Valve

Features

  • Operate the valves through mobile phones. Also available auto / manual operation
  • Long life cycle,constant Quality & compact design
  • Available in 1″,1.5″,2″,3″,4″ Size with 12 bar pressure at affordable price
  • Suitable for multi tanks automation,Online water Pumping and Agriculture

Technical specifications

ParameterRating
Operating Voltage24V DC
Butterfly Valves

Greenly · Valves

Butterfly Valves

Features

  • Patented retainer-less design – High integrity sealing, facilitates quick disassembly at the site
  • Two independent seats – Consistent sealing even in uneven flow
  • Raised profile of the soft seat enhances sealing
  • Integrally moulded liner
  • A Stopper pin prevents the discs from coming into contact with each other and thus prevents disc damage. The stopper pin also prevents spring failure by ensuring that the discs don’t travel beyond the full-open position
  • For sizes 6” and above, the lifting eyebolt option is provided
  • Drain connections are provided on demand

Technical specifications

ParameterRating
Operating Voltage110V & 230V AC

Selection guide

What to check before you choose

Have these details ready. They decide the right system and model, and they speed up your quotation.

  • Number of valves or zones, and the distance from the pump room to the furthest valve
  • Whether cable can be laid to every valve, or wireless nodes are better
  • Pipe size at each valve (1" to 4") and the working pressure
  • Water quality, which decides the filter type (screen, disc or sand media)
  • Whether you will inject fertiliser through the drip system
  • How you want to control and monitor: on site, by SMS or through the app

From enquiry to handover

How we work

  1. 01

    Share your requirement

    Tell us the crop or site, the area, the water source and the pump you use today. A phone photo of the pump panel helps.

  2. 02

    Survey and design

    We check the water source, pressure, power supply and layout, then size the system and the controls.

  3. 03

    Itemised quotation

    You receive a quotation with every component, model and quantity listed, so you can compare like for like.

  4. 04

    Supply and installation

    Our team supplies and installs the system, wires the controllers and tests every zone and alarm.

  5. 05

    Training and handover

    We show you how to run, schedule and maintain the system, including the mobile app where it is used.

  6. 06

    Service support

    Spares, repairs and upgrades are available from our Chennai and Bengaluru offices.

FAQs

Frequently asked questions

Still have a question? Call +91 86100 00128 or contact us.

Which valve size do I need?

Size the valve to the zone flow and pipe size, not just the pipe. An undersized valve loses pressure; an oversized one may not close reliably at low flow.

Can I automate an existing drip system?

In most cases, yes. We add a controller, solenoid valves at each zone and, where needed, a filter flush, fertiliser unit and sensors. The existing laterals and drippers stay in place if they are in good condition.

Wired or wireless valve control: which is better?

Wired decoders are economical where cable can be laid safely along the mainline. Wireless nodes avoid trenching over long distances or across roads and plots. Wireless range is about 500 m line of sight, and a repeater extends it.

Why is filtration so important in drip irrigation?

Drippers have very small openings and block easily with sand, algae or salts. A filter sized for your water source and flow keeps emitters clean; an automatic back-flush keeps it working without daily manual cleaning.

Can fertiliser be applied through the drip system?

Yes. Fertigation injects water-soluble fertiliser into the drip line so each plant receives it at the root zone. A fertiliser controller lets you schedule doses per valve or crop.

Do the controllers work with the Greenly mobile app?

The smart drip controllers can be operated through the mobile or web app, and by SMS and voice call on GSM models. Live valve status depends on the model you choose.

Explore further

Related solutions and products

From requirement to quotation

Tell us about your farm or site

Share the crop or site, the area, the water source and your pump. We reply with the right system and an itemised quotation.

Talk to an irrigation engineer

Not sure which system fits your farm or site?