Sprinkler Irrigation Products

Sprinkler Irrigation is a method of applying irrigation water which is similar to rainfall. Water is distributed through a system of pipes usually by pumping. It is then sprayed into the air and irrigated entire soil surface through spray heads so that it breaks up into small water drops which fall to the ground.

Sprinklers provide efficient coverage for small to large areas and are suitable for use on all types of properties. It is also adaptable to nearly all irrigable soils since sprinklers are available in a wide range of discharge capacity.

Greenly Sprinkler system is designed to ensure maximum water saving, combining high quality, affordability and ease of installation. All the products are made out of high strength & chemical resistance engineering plastics to achieve functional satisfaction and to maintain cost economics.

All sprinklers undergo extensive quality testing in our well equipped state of the art lab. Moreover, performance of the products are also tested in the field to ensure uniform water distribution and higher efficiency.
Transmitter and Receiver

Spray Heads, Jets & Foggers

Spray Heads, Jets & Foggers are used to maintain humidity or temperature control in greenhouse, shade house.

Spray Heads, Jets & Foggers are manufactured from good quality virgin raw material, easy to install, reliable performance are some of the common features of our fogger and misters. It can be supplied with Leakage Prevention Device (LPD) for pulsed operation and to prevent low head drainage. Ideal for plant propagation, recommended for climate control in Greenhouse / Shade house. Suitable for crops which require maintaining micro climate in the canopy area.
IOT irrigation

Rain Sprinkler Systems

Rain Sprinkler Systems is a mini irrigation system i.e., laterals and sprinklers can be easily shifted from one place to other. Reinstallation of the system is also easy and consumes less time and labour.It overcomes all the limitations of conventional sprinkler irrigation system and yet meets the high standards of effective irrigation principles such as:
High distribution uniformity.
Controlled application rate.
Gentle precipitation, low droplet impact on soil structure and no foliage damage.
Short irrigation cycles to provide optimal growing conditions with highly accessible water and nutrient in controlled wetted and aerated soil profile. in Rainport™ irrigation system, flexible polyethylene tubes are used as a laterals and high performance low weight plastic sprinklers are connected to these tubes using easily detachable connectors. Sprinklers are fixed on MS riser rods.

Over Head Sprinklers

Overhead Sprinklers are designed for a wide range of general field uses portable, semi-portable and solid set systems, to meet the demanding needs of modern, economic irrigation systems.

Featuring a sophisticated field tested construction and the use of highly corrosion resistant materials, they ensure fall safe operation and long life requiring a minimum maintenance. we have a wide range of overhead sprinkler starting from small nozzle size with low flow rates to large nozzle size with high flow rates.
Heavy duty metal impact sprinklers, 3/4” male or female.
Specially designed for frost protection. The top cap completely seals and protects the sprinkler from frost damage.
Uniform precipitation rate.
Fertilizer controller


Plastic Impact Sprinklers are designed for a wide range of general field uses portable, semi-portable and solid set systems, to meet the demanding needs of modern, economic irrigation systems.
Hydraulically Designed Barrel and Taper Bore Nozzle Excellent hydraulic design, large barrel cross section and full size taper bore nozzle allows for maximum possible throw and performance.
Easy Stream Break-up Adjustment Three stream break-up frequencies can be selected manually, without tools, in order to adjust rotation speed and to optimize the water distribution.
Patented Self-Compensating Break System Unique patented selfcompensating break system keeps overall performance constant over time.
Patented Drive System Patented drive system with excellent stream diffusion allows for smooth & steady operation.
Valve Controller

Landscape & Residential

Landscape & Residential Sprinklers are designed for a wide range of general field uses portable systems, to meet the demanding needs of modern, economic irrigation systems.
Rugged Ribbing Case Rugged ribbing case for maximum strength and durability, also provides anti-vandalism anchorage
Finger-Tip Adjustment Mechanism User friendly, finger tip adjustment to full or part circle mechanism
High Performance Washer Long life Teflon washer helps to give uniform and hassle free rotation
Diffuser Screw Control Diffuser screw breaks water into smaller droplets for uniform watering
Vanes in Nozzle Integrated stream-straightening vane for maximum range
Option for Inlet Connection Available in ½” female threaded connection for connectivity with system either from bottom or from one side.
Irrigation Filters

Sprinkler Filters

Water is not found in its purest form in nature. It is always contaminated with physical, chemical & biological impurities. Proper filtration is of much importance to prevent low pressure diffuser like emitters from clogging.
Hydraulic Flushing Mechanism Hydraulic flushing mechanism according to pressure differential pilot with Rinse Controller
Self-Suction Cleaning Mechanism Cleaning of the filter is carried out by the suction smart scanner which rotates spirally across the screen.
Unique Smart Scan ElementEquipped with Smart-Scan, Unique filtering element, to assure high performance and effective filtration.
pressure devices

Sprinkler Valves

We provide complete solution for Control and Safety Valves. Our high performance valves are with manual and or automatic control. Our Plastic valves are cost effective, easy to install & maintain, value driven and customized for specific requirement. We also provides turnkey services for survey, designing & installation.
Compact Double Union (DU) design, manufactured from high performance rigid uPVC compound
Easy to Install and Dismantle. Two union nuts provided for both ends provides easiness to install and dismantle valve
Chemical resistant nitrile rubber- O-rings ensures leak proof operation for longer period.
Added with Safety Added with safety for accidental loosening of the ball is prevented
Equipped with Leak Proof Handle Valve Stem with Stem `O´ ring prevents leakage from handle.
Irrigation Control Panels

Poly Fittings & Accessories

Poly fittings are manufactured from reinforced PPCP,the provide excellent chemical and weather resistance. Poly Fittings and Accessories help you to obtain a most reliable irrigation system. Leak proof, snap proof fittings. Poly fittings and accessories are made from the best materials under strict quality control. They are made for long term reliable service, easy to assemble and disassemble.
Ribs on tapered side Innovative ribs provided to prevent snap out of tube.
Innovative Cap for holding Special cap provided to hold tube from outer side.
Special Cap provided to lock the thin wall thickness tube
Additional front start barb provided to hold the tube

Accessories Includes

Emitting Pipe Fittings, Dripline Fittings, Polybarbed Fittings, Turbo Barb Fittings , Power Loc™ Fittings, Compression Fittings, SRS Light masters, Ring Lock Fittings, Extension Tube Fittings, Control Tube Fittings...
Our company’s main objective is to provide a complete water management automation system for the domestic, industrial and agricultural sectors.
Greenly Irrigation Systems
Plot #5 A, VRS Nagar Road, Cheremaanagar Near 6th Bus stop, Coimbatore, Tamil Nadu 641035, India.
+91 75502 35041greenlyirrigationsystems@gmail.com
Copyright @ 2021 Greenly Irrigation Systems | All Rights are Reserved | Powered by Ingenium Business Solutions
envelopephonemap-marker linkedin facebook pinterest youtube rss twitter instagram facebook-blank rss-blank linkedin-blank pinterest youtube twitter instagram