Skip to content

Drip, sprinkler and irrigation automation · Chennai & Bengaluru

Drip automation

Wireless drip irrigation nodes: valve transmitters, receivers and repeaters

When valves are far from the motor room, Greenly wireless nodes operate them without cable: a transmitter at the controller, receivers and 2-valve controllers at the field, and repeaters to extend range.

Wireless drip irrigation nodes: valve transmitters, receivers and repeaters
Nodes
Transmitter, receiver, 2-valve, repeater
Range
About 500 m line of sight
Extends
Repeater C
Indication
LED valve status

Range

Models (4)

Compare features and ratings, then ask for the price and datasheet of the model that fits.

Drip – Wireless Valve Controller Transmitter

Greenly · Wireless drip nodes

Drip – Wireless Valve Controller Transmitter

Features

  • If the distance between a motor room and the valve is large,the Greenly valves can be operated using a wireless device called a transmitter and receiver
  • If there is no power supply where the valve is located it can be powered by a solar battery
  • This method is used in overcrowded areas as the wires cannot be carried where there are intersections such as highways,canals and private lands

Technical specifications

ParameterRating
Operating Voltage24V to 30V AC
DimensionL 160 X W 32 X H 102 mm
Drip – Wireless Valve Controller Receiver

Greenly · Wireless drip nodes

Drip – Wireless Valve Controller Receiver

Features

  • If the distance between a motor room and the valve is large,the Greenly valves can be operated using a wireless device called a transmitter and receiver
  • If there is no power supply where the valve is located it can be powered by a solar battery
  • This method is used in overcrowded areas as the wires cannot be carried where there are intersections such as highways,canals and private lands

Technical specifications

ParameterRating
Operating Voltage24V to 30V AC
DimensionL 160 X W 32 X H 102 mm
Drip – Wireless 2 Valve Controller

Greenly · Wireless drip nodes

Drip – Wireless 2 Valve Controller

Features

  • Can operate upto 2 valves with Greenly 2 valve controller
  • LED lights indicate which valves are in operation
  • It must be connected to the master controller according to the number of valves

Technical specifications

ParameterRating
Operating Voltage24V to 30V AC
DimensionL 150 X W 90 X H 133 mm
Drip – Wireless Repeater C

Greenly · Wireless drip nodes

Drip – Wireless Repeater C

Features

  • If the distance between decoders is more than 500 meters we use decoder repeaters

Technical specifications

ParameterRating
Operating Voltage24V to 30V AC
DimensionL 160 X W 32 X H 102 mm

Selection guide

What to check before you choose

Have these details ready. They decide the right system and model, and they speed up your quotation.

  • Number of valves or zones, and the distance from the pump room to the furthest valve
  • Whether cable can be laid to every valve, or wireless nodes are better
  • Pipe size at each valve (1" to 4") and the working pressure
  • Water quality, which decides the filter type (screen, disc or sand media)
  • Whether you will inject fertiliser through the drip system
  • How you want to control and monitor: on site, by SMS or through the app

From enquiry to handover

How we work

  1. 01

    Share your requirement

    Tell us the crop or site, the area, the water source and the pump you use today. A phone photo of the pump panel helps.

  2. 02

    Survey and design

    We check the water source, pressure, power supply and layout, then size the system and the controls.

  3. 03

    Itemised quotation

    You receive a quotation with every component, model and quantity listed, so you can compare like for like.

  4. 04

    Supply and installation

    Our team supplies and installs the system, wires the controllers and tests every zone and alarm.

  5. 05

    Training and handover

    We show you how to run, schedule and maintain the system, including the mobile app where it is used.

  6. 06

    Service support

    Spares, repairs and upgrades are available from our Chennai and Bengaluru offices.

FAQs

Frequently asked questions

Still have a question? Call +91 86100 00128 or contact us.

How are wireless nodes powered in the field?

Field nodes run from a local supply or solar and battery, depending on the model and site. We confirm the power option during design.

Can I automate an existing drip system?

In most cases, yes. We add a controller, solenoid valves at each zone and, where needed, a filter flush, fertiliser unit and sensors. The existing laterals and drippers stay in place if they are in good condition.

Wired or wireless valve control: which is better?

Wired decoders are economical where cable can be laid safely along the mainline. Wireless nodes avoid trenching over long distances or across roads and plots. Wireless range is about 500 m line of sight, and a repeater extends it.

Why is filtration so important in drip irrigation?

Drippers have very small openings and block easily with sand, algae or salts. A filter sized for your water source and flow keeps emitters clean; an automatic back-flush keeps it working without daily manual cleaning.

Can fertiliser be applied through the drip system?

Yes. Fertigation injects water-soluble fertiliser into the drip line so each plant receives it at the root zone. A fertiliser controller lets you schedule doses per valve or crop.

Do the controllers work with the Greenly mobile app?

The smart drip controllers can be operated through the mobile or web app, and by SMS and voice call on GSM models. Live valve status depends on the model you choose.

Explore further

Related solutions and products

From requirement to quotation

Tell us about your farm or site

Share the crop or site, the area, the water source and your pump. We reply with the right system and an itemised quotation.

Talk to an irrigation engineer

Not sure which system fits your farm or site?