Skip to content

Drip, sprinkler and irrigation automation · Chennai & Bengaluru

Pump starters & controllers

1/3 phase pump controllers for two-phase and three-phase operation

In many rural areas three-phase power is available only for part of the day. Greenly 1/3-phase controllers run three-phase pumps on two or three phases, with adjustable star-delta timing, voltage cut-off and dry run and overload protection.

1/3 phase pump controllers for two-phase and three-phase operation
Operation
2-phase and 3-phase
Starting
Adjustable star-delta time
Models
1CT BSS, 1CT BSD, 3CT BSD
Extra
Auto capacitor change-over

Range

Models (4)

Compare features and ratings, then ask for the price and datasheet of the model that fits.

3010 1/3 Phase 1CT BSS

Greenly · 1/3 phase controllers

3010 1/3 Phase 1CT BSS

Suitable for
  • Three Phase Pumps

Features

  • Adjustable Star to Delta Time
  • 2 & 3 Phase Operations
  • Low / High Voltage Cut-Off
  • Dry Run / Over Load Protection
  • Dry Run / Restart timer Facility
  • Delay On Timer
  • Cyclic Timer
  • Adjustable Voltage & Current Setting
  • Micro Controller based Single Phase Preventer(SPP)
  • Seven Segment LED Display Indication

Technical specifications

ParameterRating
Operating Voltage (AC)3∅ - 300V to 470V
Operating Voltage for float SensorMin 12V to Max 30V DC
Calibration accuracy+/- 5%
DimensionL 150 X W 150 X H 100 mm
Relay Load3∅ - 10 Amp
Indirect Load ***Any Size
3010 1/3 Phase 1CT BSD

Greenly · 1/3 phase controllers

3010 1/3 Phase 1CT BSD

Suitable for
  • Three Phase Pumps

Features

  • Adjustable Star to Delta Time
  • 2 & 3 Phase Operations
  • Low / High Voltage Cut-Off
  • Dry Run / Over Load Protection
  • Dry Run / Restart timer Facility
  • Delay On Timer
  • Cyclic Timer
  • Adjustable Voltage & Current Setting
  • Micro Controller based Single Phase Preventer(SPP)
  • Seven Segment LED Display Indication

Technical specifications

ParameterRating
Operating Voltage (AC)3∅ - 300V to 470V
Operating Voltage for float SensorMin 12V to Max 30V DC
Calibration accuracy+/- 5%
DimensionL 150 X W 150 X H 100 mm
Relay Load3∅ - 10 Amp
Indirect Load ***Any Size
3010 1/3 Phase 3CT BSD

Greenly · 1/3 phase controllers

3010 1/3 Phase 3CT BSD

Suitable for
  • Three Phase Pumps

Features

  • Adjustable Star to Delta Time
  • 2 & 3 Phase Operations
  • Low / High Voltage Cut-Off
  • Dry Run / Over Load Protection
  • Dry Run / Restart timer Facility
  • Delay On Timer
  • Cyclic Timer
  • Adjustable Voltage & Current Setting
  • Micro Controller based Single Phase Preventer(SPP)
  • Seven Segment LED Display Indication

Technical specifications

ParameterRating
Operating Voltage (AC)3∅ - 300V to 470V
Operating Voltage for float SensorMin 12V to Max 30V DC
Calibration accuracy+/- 5%
DimensionL 150 X W 150 X H 100 mm
Relay Load3∅ - 10 Amp
Indirect Load ***Any Size
Auto Capacitor Change Over – SSN

Greenly · 1/3 phase controllers

Auto Capacitor Change Over – SSN

Features

  • Dry Run Protection
  • Overload Protection
  • Seven Segment LED Display Indication

Technical specifications

ParameterRating
Operating Voltage1∅ – 150V to 270V
DimensionL 130 X W 90 X H 70 mm

Selection guide

What to check before you choose

Have these details ready. They decide the right system and model, and they speed up your quotation.

  • Single-phase or three-phase supply, and whether the motor sometimes runs on two phases
  • Pump type and rating: submersible, open-well or monoblock, in hp
  • Starting method: direct-on-line or star-delta
  • Whether you need tank-level control (top tank, sump or both)
  • Whether you want remote control by call, SMS or app (GSM models)
  • Typical voltage at the site, and how often power cuts or fluctuations happen

From enquiry to handover

How we work

  1. 01

    Share your requirement

    Tell us the crop or site, the area, the water source and the pump you use today. A phone photo of the pump panel helps.

  2. 02

    Survey and design

    We check the water source, pressure, power supply and layout, then size the system and the controls.

  3. 03

    Itemised quotation

    You receive a quotation with every component, model and quantity listed, so you can compare like for like.

  4. 04

    Supply and installation

    Our team supplies and installs the system, wires the controllers and tests every zone and alarm.

  5. 05

    Training and handover

    We show you how to run, schedule and maintain the system, including the mobile app where it is used.

  6. 06

    Service support

    Spares, repairs and upgrades are available from our Chennai and Bengaluru offices.

FAQs

Frequently asked questions

Still have a question? Call +91 86100 00128 or contact us.

Is it safe to run a three-phase pump on two phases?

Only with a controller designed for it. The 1/3-phase controller uses capacitors and protection to run the motor within safe current limits during two-phase supply.

How do I choose between a single-phase and a three-phase starter?

Match the starter to the motor and the supply at the pump. Single-phase models suit motors up to about 3 hp on a 230 V supply; three-phase and 1/3-phase models suit larger agricultural pumps. If your area gets only two phases for part of the day, ask for a 1/3-phase (2 & 3 phase) model.

What does dry-run protection do?

It switches the motor off when the pump is running without water, which happens when a borewell or sump runs low. Running dry overheats the pump and damages seals and windings. Most of our starters also restart automatically after a set time.

Will the starter protect my motor from voltage problems?

Yes. The controllers cut the motor off on low or high voltage and on overload, and switch it back on when supply returns to the set range. The cut-off limits can be adjusted to suit local supply conditions.

Can I switch the pump on from my phone?

GSM and GPRS models let you start and stop the pump by call, SMS or mobile app and report status, voltage and current back to you. They need a SIM card with good network coverage at the pump room.

Do you install the starter?

Yes. We supply, wire and test the starter at your pump, set the voltage, current and timer values for your motor and show you how to use it. Installation is available across Tamil Nadu, Kerala, Karnataka, Andhra Pradesh and Telangana; confirm your location when you enquire.

Explore further

Related solutions and products

From requirement to quotation

Tell us about your farm or site

Share the crop or site, the area, the water source and your pump. We reply with the right system and an itemised quotation.

Talk to an irrigation engineer

Not sure which system fits your farm or site?