Skip to content

Drip, sprinkler and irrigation automation · Chennai & Bengaluru

Drip automation

Electric valve actuators for ball valves and dampers

Greenly electric actuators automate small ball valves, plug valves and dampers, so manual valves can be opened and closed by the controller.

Electric valve actuators for ball valves and dampers
Models
ITQ 0020, 0040, 0080
Valves
Small ball, plug valves, dampers
Supply
85–265 V AC, optional 24 V AC/DC
Drive
Spur and worm gears

Range

Models (3)

Compare features and ratings, then ask for the price and datasheet of the model that fits.

ITQ 0020

Greenly · Actuators

ITQ 0020

Features

  • Suitable for small 1” ball valve automation
  • Very high efficiency & cyclic life
  • Free voltage (85~265 VAC,1Phase) and optional 24VAC/DC
  • Very compact and light weight
ITQ 0040

Greenly · Actuators

ITQ 0040

Features

  • Suitable for on-off small ball / plug valves and damper automation
  • By the combination of spur gears, provide very high efficiency
  • The motor is a specially designed induction motor that produces high starting torques and is thermally protected from overheating
  • Manual operation by Hex Wrench and dome position indication
  • Compact and light weight
  • High duty cycle
ITQ 0080

Greenly · Actuators

ITQ 0080

Features

  • Newly designed and developed for especially small ball & plug valves and damper automation
  • Self-locking combination of spur and worm gears that require no brake
  • The motor is a specially designed induction motor that produces high starting torques and is thermally protected from overheating
  • Mechanical Stopper bolts to prevent over travel
  • Easy set cams without the special tool
  • Manual operation by wrench directly to the worm gearbox and dial position indication

Technical specifications

ParameterRating
Operating Voltage24V DC

Selection guide

What to check before you choose

Have these details ready. They decide the right system and model, and they speed up your quotation.

  • Number of valves or zones, and the distance from the pump room to the furthest valve
  • Whether cable can be laid to every valve, or wireless nodes are better
  • Pipe size at each valve (1" to 4") and the working pressure
  • Water quality, which decides the filter type (screen, disc or sand media)
  • Whether you will inject fertiliser through the drip system
  • How you want to control and monitor: on site, by SMS or through the app

From enquiry to handover

How we work

  1. 01

    Share your requirement

    Tell us the crop or site, the area, the water source and the pump you use today. A phone photo of the pump panel helps.

  2. 02

    Survey and design

    We check the water source, pressure, power supply and layout, then size the system and the controls.

  3. 03

    Itemised quotation

    You receive a quotation with every component, model and quantity listed, so you can compare like for like.

  4. 04

    Supply and installation

    Our team supplies and installs the system, wires the controllers and tests every zone and alarm.

  5. 05

    Training and handover

    We show you how to run, schedule and maintain the system, including the mobile app where it is used.

  6. 06

    Service support

    Spares, repairs and upgrades are available from our Chennai and Bengaluru offices.

FAQs

Frequently asked questions

Still have a question? Call +91 86100 00128 or contact us.

Can I automate my existing manual ball valve?

Yes, if the valve size and torque suit the actuator and a mounting kit is available. Share the valve size and make.

Can I automate an existing drip system?

In most cases, yes. We add a controller, solenoid valves at each zone and, where needed, a filter flush, fertiliser unit and sensors. The existing laterals and drippers stay in place if they are in good condition.

Wired or wireless valve control: which is better?

Wired decoders are economical where cable can be laid safely along the mainline. Wireless nodes avoid trenching over long distances or across roads and plots. Wireless range is about 500 m line of sight, and a repeater extends it.

Why is filtration so important in drip irrigation?

Drippers have very small openings and block easily with sand, algae or salts. A filter sized for your water source and flow keeps emitters clean; an automatic back-flush keeps it working without daily manual cleaning.

Can fertiliser be applied through the drip system?

Yes. Fertigation injects water-soluble fertiliser into the drip line so each plant receives it at the root zone. A fertiliser controller lets you schedule doses per valve or crop.

Do the controllers work with the Greenly mobile app?

The smart drip controllers can be operated through the mobile or web app, and by SMS and voice call on GSM models. Live valve status depends on the model you choose.

Explore further

Related solutions and products

From requirement to quotation

Tell us about your farm or site

Share the crop or site, the area, the water source and your pump. We reply with the right system and an itemised quotation.

Talk to an irrigation engineer

Not sure which system fits your farm or site?