Skip to content

Drip, sprinkler and irrigation automation · Chennai & Bengaluru

FAQs

Frequently asked questions

Answers to the questions we hear most about irrigation systems, pump starters, controllers, installation and support.

01

Ordering and quotations

What do I need to send for a quotation?

Your location, the crop or site, the area, the water source and the pump details. Photos of the pump, panel and site help us reply faster.

Do you give a site survey?

Yes, for systems that need design and installation. Survey arrangements depend on the location and the project size; we confirm them when you enquire.

Can I buy only controllers or spares?

Yes. Starters, controllers, sensors, valves and accessories are sold individually as well as in complete systems.

02

Installation and support

Who installs the system?

Our own team or trained installers working with us. Wiring, testing and setting the controller are part of the installation.

Do you service systems after installation?

Yes. We offer maintenance visits, repairs and spares, and support by phone and WhatsApp.

What warranty do the products carry?

Warranty terms depend on the product and are stated in the quotation and invoice.

03

Irrigation systems

What information do you need for a quotation?

The crop, the area and plot shape, the water source and pump details, and a location pin. With these we can prepare a layout and an itemised quotation; a site visit confirms the final design.

Can the system be automated later?

Yes. We design the mainline and valve positions so that solenoid valves, a controller and sensors can be added later without replacing the pipe network.

Is a government subsidy available for micro irrigation?

Central and state schemes support drip and sprinkler systems for eligible farmers, and the rates and process change from time to time. Check with your district agriculture or horticulture office; we can share the system documents needed for your application.

How long does installation take?

Small farms and gardens are usually completed in a few days once materials are on site. Larger farms are planned in phases; we give you a schedule with the quotation.

Do you provide maintenance?

Yes. We offer flushing, filter servicing, leak repair, emitter replacement and controller checks, and supply spares for the systems we install.

04

Irrigation automation

What does an irrigation automation system control?

It controls the pump starter, the zone valves, the filter flush and the fertiliser unit from one controller. You set a schedule, and the system runs each zone in turn and protects the pump.

Do I need internet at the farm?

GSM models work over a normal mobile SIM for calls and SMS; app control uses GPRS or 4G data. Wi-Fi models need a Wi-Fi network at the controller. We check network coverage during the site survey.

Can irrigation run by soil moisture instead of a timer?

Yes. With moisture sensors the controller can skip or shorten irrigation when the soil is already wet. Time-based and flow-based schedules are also available.

What happens during a power cut?

The controller keeps its schedule and settings. When power returns, it checks voltage and restarts the pump and valves according to the programme and the restart timer.

Is training provided?

Yes. We train the farm owner and staff on scheduling, the app, alarms and routine checks at handover, and remain available on phone and WhatsApp.

05

Pump starters & controllers

How do I choose between a single-phase and a three-phase starter?

Match the starter to the motor and the supply at the pump. Single-phase models suit motors up to about 3 hp on a 230 V supply; three-phase and 1/3-phase models suit larger agricultural pumps. If your area gets only two phases for part of the day, ask for a 1/3-phase (2 & 3 phase) model.

What does dry-run protection do?

It switches the motor off when the pump is running without water, which happens when a borewell or sump runs low. Running dry overheats the pump and damages seals and windings. Most of our starters also restart automatically after a set time.

Will the starter protect my motor from voltage problems?

Yes. The controllers cut the motor off on low or high voltage and on overload, and switch it back on when supply returns to the set range. The cut-off limits can be adjusted to suit local supply conditions.

Can I switch the pump on from my phone?

GSM and GPRS models let you start and stop the pump by call, SMS or mobile app and report status, voltage and current back to you. They need a SIM card with good network coverage at the pump room.

Do you install the starter?

Yes. We supply, wire and test the starter at your pump, set the voltage, current and timer values for your motor and show you how to use it. Installation is available across Tamil Nadu, Kerala, Karnataka, Andhra Pradesh and Telangana; confirm your location when you enquire.

06

Drip automation components

Can I automate an existing drip system?

In most cases, yes. We add a controller, solenoid valves at each zone and, where needed, a filter flush, fertiliser unit and sensors. The existing laterals and drippers stay in place if they are in good condition.

Wired or wireless valve control: which is better?

Wired decoders are economical where cable can be laid safely along the mainline. Wireless nodes avoid trenching over long distances or across roads and plots. Wireless range is about 500 m line of sight, and a repeater extends it.

Why is filtration so important in drip irrigation?

Drippers have very small openings and block easily with sand, algae or salts. A filter sized for your water source and flow keeps emitters clean; an automatic back-flush keeps it working without daily manual cleaning.

Can fertiliser be applied through the drip system?

Yes. Fertigation injects water-soluble fertiliser into the drip line so each plant receives it at the root zone. A fertiliser controller lets you schedule doses per valve or crop.

Do the controllers work with the Greenly mobile app?

The smart drip controllers can be operated through the mobile or web app, and by SMS and voice call on GSM models. Live valve status depends on the model you choose.

07

Water level & tank control

How does an automatic water level controller work?

Sensors in the overhead tank and the sump tell the controller the water level. It starts the pump when the overhead tank is low and the sump has water, and stops it when the tank is full or the sump runs dry.

Do I need to run a cable from the tank to the pump room?

Not with the wireless models. A transmitter at the tank sends the level to a receiver at the pump, which is useful in apartments, factories and farms where cabling is difficult.

Which sensor type should I use?

Float switches are simple and economical. Magnetic and screw-type sensors are sealed, resist scaling and corrosion, and suit tanks where floats tangle or stick. We recommend the type after checking the tank.

Will this reduce my electricity and water use?

It stops overflow and dry running, which are the two common sources of waste, and keeps the pump from running longer than needed. Actual savings depend on how the tank was being filled before.

08

Protected cultivation

What is the difference between a polyhouse and a net house?

A polyhouse is covered with UV-stabilised plastic film that keeps rain out and holds humidity. A net house uses shade or insect net that cuts sunlight and pests but lets air and rain through. The crop and the local climate decide which suits you.

Do you install irrigation and misting inside the structure?

Yes. We plan drip, foggers or misting and the controller together with the structure, so pipes, pumps and nozzles fit the layout from the start.

Are subsidies available for protected cultivation?

National and state horticulture schemes support polyhouses, net houses and their irrigation for eligible growers. The current rates and conditions are available from your district horticulture office.

What size can you build?

From small nursery and research units to commercial structures. Share your plot dimensions and crop, and we will suggest a layout and module size.

From requirement to quotation

Tell us about your farm or site

Share the crop or site, the area, the water source and your pump. We reply with the right system and an itemised quotation.

Talk to an irrigation engineer

Not sure which system fits your farm or site?